) into a wall outlet near your router and connect them via an Ethernet cable. : Plug the
: Connect an Ethernet cable from the second adapter to your computer, console, or streaming device.
Plug the first PLS-8171 into a wall outlet near your main router. Use an Ethernet cable to connect the router’s LAN port to the adapter’s RJ-45 port.
The Zinwell PLS-8171 is covered by a limited one-year warranty. For more information, please contact our customer support team.
The Zinwell PLS-8171 is a high-definition satellite receiver that supports:
This device is not a Wi-Fi extender. It does not broadcast a wireless signal; it only provides a wired Ethernet connection through a wall outlet.
Wait approximately 60 seconds for the configuration to complete.
Problem: Forgot the security password / Devices won't connect after pairing
, covering installation, configuration, troubleshooting, and safety guidelines. 1. Understanding the Zinwell PLS-8171
Built-in IEEE 802.3af Type 2 PoE (up to 15.4W), allowing it to power devices like IP cameras or VoIP phones directly through the Ethernet cable. High-Speed G.hn Technology:
Q: What is the Zinwell PLS-8171? A: The Zinwell PLS-8171 is a satellite receiver used for broadcasting and telecommunications.
Plug both adapters into outlets in the same room for initial pairing.
The is not your average powerline adapter. Unlike standard extenders that simply push internet through electrical wiring, this device is a specialized G.hn Power over Ethernet (PoE) Bridge . It is designed to provide both high-speed data and electrical power to a device over a single Ethernet cable.
Perform a factory reset by holding the reset/pair button for over 10 seconds. Attempt the pairing process again. 5. Safety Precautions
The user manual provides critical instructions for maintaining a stable connection:
) into a wall outlet near your router and connect them via an Ethernet cable. : Plug the
: Connect an Ethernet cable from the second adapter to your computer, console, or streaming device.
Plug the first PLS-8171 into a wall outlet near your main router. Use an Ethernet cable to connect the router’s LAN port to the adapter’s RJ-45 port.
The Zinwell PLS-8171 is covered by a limited one-year warranty. For more information, please contact our customer support team. zinwell pls-8171 user manual
The Zinwell PLS-8171 is a high-definition satellite receiver that supports:
This device is not a Wi-Fi extender. It does not broadcast a wireless signal; it only provides a wired Ethernet connection through a wall outlet.
Wait approximately 60 seconds for the configuration to complete. ) into a wall outlet near your router
Problem: Forgot the security password / Devices won't connect after pairing
, covering installation, configuration, troubleshooting, and safety guidelines. 1. Understanding the Zinwell PLS-8171
Built-in IEEE 802.3af Type 2 PoE (up to 15.4W), allowing it to power devices like IP cameras or VoIP phones directly through the Ethernet cable. High-Speed G.hn Technology: Use an Ethernet cable to connect the router’s
Q: What is the Zinwell PLS-8171? A: The Zinwell PLS-8171 is a satellite receiver used for broadcasting and telecommunications.
Plug both adapters into outlets in the same room for initial pairing.
The is not your average powerline adapter. Unlike standard extenders that simply push internet through electrical wiring, this device is a specialized G.hn Power over Ethernet (PoE) Bridge . It is designed to provide both high-speed data and electrical power to a device over a single Ethernet cable.
Perform a factory reset by holding the reset/pair button for over 10 seconds. Attempt the pairing process again. 5. Safety Precautions
The user manual provides critical instructions for maintaining a stable connection:
Copyright © 2026 CG Shore