Let’s break down why this specific version holds the crown.
Since modern Windows 10/11 does not run DOS, you have two options.
Go to to input your Rx/Tx frequencies and PL/DPL privacy codes.
Unlike modern radios that utilize unified digital platforms like MOTOTRBO CPS 2.0, the GM160 relies on a legacy 5-tone/PL application specifically tailored to the Waris platform.
If you are searching for the practices, this guide covers the essential tools, hardware, and tips to get your radio configured correctly. 1. Understanding the Software: Motorola CPS
Ensure the cable is plugged firmly into the front microphone socket. Verify that the COM port in the software settings matches the port used by the USB cable in Windows Device Manager. motorola gm160 programming software best
To successfully program a Motorola GM160, the user must understand the relationship between the radio series and the software architecture.
Running the CPS installer and application with "Compatibility Mode" set to Windows XP (Service Pack 3) and running as an Administrator.
: Immediately save this original file as a backup (e.g., GM160_Backup_Original.cp ). Never skip this step. If a mistake is made, this file is your only safety net. 4. Editing Configurations You can now alter the codeplug parameters:
Follow this standard workflow to safely read and write data to your radio using the CPS: Step 1: Install Drivers and Software
The official and best software for programming the Motorola GM160 Let’s break down why this specific version holds the crown
The GM160 programs through the front microphone jack (RJ45 port). You need an or RJ45-to-DB9 (Serial) programming cable.
Before downloading anything, you must understand the evolution of Motorola software. The GM160 sits right on the generational divide.
Motorola no longer officially sells this software. It is primarily found through radio enthusiast forums, ham radio groups, or legacy software libraries.
You must have the correct version (revision) of the software. If a radio was previously programmed with a newer version of CPS, an older version will not be able to read it. Essential Programming Accessories
: This software allows you to read the "codeplug" from the radio, modify frequencies, signaling (MDC1200, Select-5), and button assignments, and then write the data back to the device. Necessary Hardware Unlike modern radios that utilize unified digital platforms
: While originally designed for older versions of Windows, the latest versions can often run on Windows 10 Key Features
The GM160 is highly capable in 5-Tone signaling environments. Use the software to set up unique IDs for your fleet.
The best and only software to program the GM160 is the (Customer Programming Software). Depending on your geographic region, you will need a specific regional variant:
For the smoothest experience, consider these "best" practices for running legacy Motorola software: Operating System