Insert the prepared USB flash drive into the USB port located on the side of the device. Power on the meter. Press the button on the keypad.
: Updates can improve auto-scan speeds (often under 12 seconds per transponder) and frequency resolution (up to 1 kHz steps Step-by-Step Software Upgrade Guide The WS-6979 typically supports upgrades via a RS-232 connection depending on the specific hardware version. Method 1: USB Upgrade (Preferred) Download Firmware : Locate the latest firmware file (often a file) from a reliable satellite technician forum or the official manufacturer site. Format USB : Ensure your USB drive is formatted to Transfer File
Open your file explorer, right-click the drive, and select . Choose FAT32 as the file system and click Start .
Be aware of these potential pitfalls:
: Ensure the meter has at least an 80% charge, or keep it connected to the wall charger.
Visit reputable satellite enthusiast forums (such as SatUniverse or Digital Kaos) or the official distributor archive pages.
Confirm the drive is formatted to FAT32. If it still fails, try using an older USB 2.0 drive with lower storage capacity (e.g., 4GB or 8GB), as some satellite finders struggle to read high-speed USB 3.0 or large-capacity media. "File Not Found" or "Invalid File" Error satlink ws6979 software upgrade free
: Most older models require an RS-232 to USB cable , though some newer combo meters can be updated via a USB flash drive inserted directly into the device's USB port. Typical Upgrade Steps
Upgrading the Satlink WS6979 software is a relatively straightforward process. Here's a step-by-step guide to help users through the process:
Once formatted, locate your downloaded Satlink software upgrade file. If it arrived in a compressed format (such as .zip or .rar ), extract it. Insert the prepared USB flash drive into the
Do you need updated for a specific region?
If you want, I can tailor this post for a specific forum (Reddit, Facebook, manufacturer support thread) or create a short social-media-friendly version.
Companies like Dreambox, FTE Maximal, or Satking sometimes host official firmware for rebranded WS6979 units. : Updates can improve auto-scan speeds (often under
Adjust the “Lock Threshold” from Default to High Sensitivity when aligning weak signals (e.g., C-band feeds).
A progress bar will appear on the screen. Once the update reaches 100%, the meter will automatically reboot.