/ppp profile add local -address=192.168.89.1 name=L2TP_Profile remote-address=VPN_Pool use-encryption=yes Use code with caution. Copied to clipboard
First, ensure your MikroTik can route traffic and has basic firewall rules. We will create a dedicated IP pool for VPN clients.
/interface l2tp-server server set enabled=yes default-profile=l2tp-profile authentication=mschap2 max-mru=1400 max-mtu=1400
/ip firewall nat add chain=srcnat src-address=192.168.100.0/24 action=masquerade comment="NAT for VPN clients" mikrotik l2tp server setup full
This comprehensive guide provides a full, step-by-step walkthrough for setting up a Layer 2 Tunneling Protocol (L2TP) server with IPsec encryption on MikroTik RouterOS.
: Check mschap2 (uncheck weaker protocols like pap, chap, and mschap1 for better security). Use IPsec : Select yes (or required on RouterOS v7).
/interface l2tp-server server set enabled=yes default-profile=L2TP_Profile use-ipsec=required ipsec-secret=MySecurePSK Use code with caution. Copied to clipboard /ppp profile add local -address=192
/ppp secret add name=john password=securepassword123 profile=l2tp-profile service=l2tp
Navigate to from the main menu and select the Profiles tab. Click the + button to create a new profile. In the General tab: Name : l2tp-profile
The first step in the setup is defining the IP addresses that will be assigned to VPN clients. These IPs exist in a virtual network space separate from the local LAN, though they must be routed to access local resources. mikrotik l2tp server setup full
The IP pool defines the range of private IP addresses that will be assigned to VPN clients when they connect.
For clients on the internet to reach your L2TP/IPsec server, you must create firewall filter rules to allow specific types of traffic. MikroTik's firewall processes rules in a , so you should drag these new rules to the top of the filter list.