: Up to 100dB at 1 meter , driven by an efficient piezo sounder element.
If your panel doesn't pull the trigger line up to >8.5V in standby, you must install a pull-up resistor (1kΩ to 10kΩ) at the panel. Elmdene International 5. Troubleshooting & Diagnostics Silent Tamper:
Problem 2: "Tamper Fault" persists on the main alarm panel keypad
If you need technical support, you can contact Elmdene at 02392 696 638 (Option 3) or email their team at technical.support@elmdene.co.uk.
Ensure you use a genuine lithium battery pack like the 7422-SFG-RF for reliable backup during power failures.
Complies with EN50131-4 for external applications.
To ensure your layout fits perfectly, what are you linking this Elmdene sounder to? Share public link
device, meaning it is designed to withstand sophisticated intruders and meets rigorous European standards for high-security installations. Visual Deterrents: The unit typically features twin flashing LEDs
Are you mounting this contact onto a ?
4k7 Shunt / 2k2 EOL (Common for Texecom/Pyronix).
Enclosure hot to touch, unit shuts down cyclically. Solution:
Official documentation is often restricted to professional installers via QR codes on the product label. For the most current wiring diagrams and instruction sheets, visit the Elmdene Downloads Page . For direct technical assistance: +44(0)23 9269 6638 (Option 3) Email: technical.support@elmdene.co.uk Hours: Monday to Friday, 8:30 am – 5:00 pm Elmdene Products - Technical Guide
Selectable/Built-in (Common variations include 4k7/2k2 or 1k/1k)
Replace it with an identical, genuine Elmdene 6V NiMh 300mAh battery pack.
The magnet and contact are supplied as a matched set; they must be used together for the high-security features to function correctly.
: Trigger an audible bell test from the control panel. Verify the volume hits its standard 100dB output and check that the strobe fires cleanly (if not disabled via the cut wire link).