Galaxy Aqua Premier Installation Manual Hot! File

Before beginning, confirm your unit matches these requirements:

switching on the electricity. Do not use plumbers' jointing compound, as this invalidates the guarantee; use P.T.F.E. tape for difficult joints instead. Electrical Safety

Gradually turn the temperature control knob to verify that the water alternates smoothly between cool, warm, and hot temperatures. Maintenance and Troubleshooting Cleaning the Filter

If your sink lacks a pre-drilled sprayer hole, you must drill a new 1/2-inch hole through the countertop or sink rim. Always use a carbide-tipped bit for porcelain or granite. galaxy aqua premier installation manual

Press the Start button. Test the unit across all settings: Low, Medium, and High heat.

The Galaxy Aqua Premier heats water instantly, so it must be correctly connected to the mains cold water supply.

A fascinating note often buried in the appendices is the requirement for the gas pipe size. Press the Start button

Once water is on, open the tank valve. Look at every push-fit connector. If you see a drop of water, turn the water off, push the tube in another 1/4 inch , and try again.

Fit the front cover onto the backplate and secure it with the screws.

Are you planning to connect the system to an ? as it will damage the membranes.

Remove all protective plastic wrapping from the new Galaxy Aqua Premier filter cartridge.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Remove the front cover of the Galaxy Aqua Premier by unscrewing the retaining screws at the bottom.

Input water temperature must be between 10°C and 40°C. Never connect the system to a hot water line, as it will damage the membranes.