Elias stepped onto the balcony, the cold wind whipping his jacket. He keyed the side PTT button."Base to Unit 5, testing the new frequency. How do you read?"
Select the option to read the radio's current data (often F2 or a "Get" command).
A progress bar should appear. Once completed, your radio's current configuration (codeplug) will display on the screen. Step 3: Modifying Frequencies and Features
Never program a radio with a low battery. If the radio dies mid-write, the codeplug can become corrupted, resulting in a permanently "bricked" radio that requires component-level flashing. motorola gp88s programming software
Before opening the software, you must connect your radio to your computer using the correct hardware interface.
Once connected, the CPS allows the following adjustments:
What (Windows 10, XP, etc.) are you using to run the software? Elias stepped onto the balcony, the cold wind
Reading the Radio: Open the Motorola GP88s programming software. Navigate to the "Device" or "Communication" menu and select "Read." This pulls the current frequency and feature data from the radio into the software. Always save a backup of this original "codeplug" before making any changes.
Within the software user interface, you can navigate through various trees or tabs to edit your settings:
The frequency (in MHz) on which the radio transmits. Leave this identical to RX for simplex operations, or adjust it for repeater offsets. A progress bar should appear
Programming the radio requires a physical connection between a computer and the radio.
This report is for informational purposes only. Programming radio equipment must comply with local laws. Unauthorised frequency programming can result in heavy fines or equipment seizure.
Turn the radio back on. Switch through the channel positions and test communication with another radio. Verify that the side buttons perform the assigned functions and that the scan feature works as intended.