Aqmos R2d272 Installation Verified

The installation of the Aqmos R2D272 is hereby verified as COMPLETE .

Ensure the bypass valve is set to the "Bypass" position. Turn your main home water supply back on and check for any immediate plumbing leaks up to the bypass.

The type of you are cutting into (Copper, PEX, Multilayer) Any error codes appearing on the digital display

Once the physical work is done, the most critical step is confirming the system is working correctly. "Installation Verified" means more than just no leaks; it means the unit is performing its function of softening your water. aqmos r2d272 installation verified

Identify the and Outlet (Softened Water) ports marked on the control valve. Cut your main water line and install the flexible connection hoses. Connect the incoming hard water line to the inlet port and the outgoing home line to the outlet port.

Hard water test kit (usually included, or purchased separately)

Pipe cutter (copper, PEX, or PVC depending on your home's plumbing) Adjustable wrenches and Teflon thread-seal tape Corrugated stainless steel or flexible PEX connection hoses The installation of the Aqmos R2D272 is hereby

Install the system in a dry, frost-free location away from direct sunlight.

Route this line to your chosen drain point, maintaining an of at least 1.5 inches above the drain rim to prevent siphoning or backflow contamination.

The heart of the R2D2-72 is its , which tracks water volume to trigger cleaning. To verify the programming: The type of you are cutting into (Copper,

AQMOS R2D272 Installation Verified: A Step-by-Step Success Report

(German degrees) or ppm (parts per million). Input this exact value. If you have iron in your water, add 3 ∘dHraised to the composed with power dH