Stihl Fs96 Manual Jun 2026

Follow the exact same steps as above, but keep the choke lever in the open position throughout the process. 4. Maintenance and Tune-Up Schedule

Lay the unit flat on the ground. Ensure the cutting head is completely clear of any obstructions. Place one hand firmly on the engine housing.

We recommend using STIHL 1:50 2-stroke engine oil with petrol, at a mix ratio of 1:50 – 1 part oil to 50 parts of petrol. Stihl (FS 96) Parts Diagrams stihl fs96 manual

Squeeze the throttle trigger briefly to release it to the idle position, and let the engine warm up for 1–2 minutes before cutting. Warm Start Sequence

High-torque gear reduction for efficient cutting. Follow the exact same steps as above, but

Pull the starter rope until the engine fires. If it fails to start after 3 pulls, apply half-choke and try again. Routine Maintenance Schedule

STIHL FS 96 Go to product viewer dialog for this item. is a classic brushcutter, and its manual highlights a few technical features that distinguish it from standard trimmers of its era: Ensure the cutting head is completely clear of

For modern Stihl branded oils, mix at a 50:1 ratio (2.6 fluid ounces of oil per 1 gallon of gasoline).

Avoid using fuel with more than 10% ethanol (E10), as it degrades internal rubber components and fuel lines over time. Starting Procedure

Find this page immediately. For the Stihl FS96:

Move the choke lever to the position.