Disco 240 Dmx Controller Manual Jun 2026

fader to change how fast the controller jumps between scenes and the fader to adjust how smoothly they blend. Sound Active: If you want the lights to move to the beat, press the MUSIC/BANK COPY button to activate the internal microphone. Pro Tips for Beginners The Blackout Button:

Programming the Disco 240 involves building individual "steps" (static looks) and saving them sequentially into a "chase" (a moving loop). 1. Entering Program Mode

You can take manual control of a light at any time during a program by pressing the button and selecting the fixture. Disco 240 Dmx Controller Manual(66) - Alibaba.com

Stores up to 240 programmable scenes and 6 banks of chases. disco 240 dmx controller manual

Find your next look, then press MIDI/Rec again to log Step 002. Repeat this process for up to 240 steps per chase.

Use the buttons to navigate to the bank containing your desired scene.

Select the fixture you want to program using the buttons (1-12). Press the PAGE button to select either Page A or Page B. fader to change how fast the controller jumps

Note: Do not confuse this with the "DMX 192" (which has 12 sliders). The Disco 240 has 24 sliders – double the control.

Ensure your fixtures are set to the correct operational mode (usually "DMX" or "Addr") and that their starting addresses precisely match the console's assignments (e.g., 1, 21, 41).

Your Disco 240 is useless without proper wiring. Follow this manual-style procedure: Find your next look, then press MIDI/Rec again

Use the buttons to choose the destination bank (01 to 30) where you want to store this look.

To trigger single looks manually, ensure the Program and Auto LEDs are off. Navigate through the 30 available memory sections using the Bank Up/Down buttons, then press any Scene button (1–8) to instantly project that specific look. To let the controller run through a chase automatically:

A "chase" is a sequence of scenes that loops automatically, allowing your lights to move to the beat of the music or on a timer. The Disco 240 can hold up to . Building a Chase Enter Program mode. Select the CHASE button (1-6) that you want to program.

stands out for its flexibility in handling complex lighting rigs: How to programe on DMX 240