Equate Ultrasonic Humidifier User Manual _verified_ Jun 2026

Most Equate ultrasonic models are filter-free, simplifying maintenance. Two Mist Speeds: Allows customization of humidity levels. Timer Setting: Allows for automatic shutoff. Mood Lighting: Features seven color-changing LED options. Dual Function: Serves as both a humidifier and a diffuser. 2. Setting Up Your Humidifier

Manages power status and mist intensity. Power Cord: Connects the base unit to the wall outlet. Initial Setup & Operation Step 1: Disassembly and Inspection

Now that you've set up your humidifier, it's time to learn how to operate it. Here's a step-by-step guide:

Turn the power knob clockwise or press the power button to turn the unit on. equate ultrasonic humidifier user manual

: Set for 2, 4, or 8 hours; a fourth press exits the timer mode.

Fill the tank with clean, cold water. Distilled or demineralized water is highly recommended to prevent white dust buildup caused by minerals. Screw the tank cap back on clockwise until it is tight. Wipe any excess water from the outside of the tank.

Check if the unit is plugged in, water is present, and the tank is seated correctly. Mood Lighting: Features seven color-changing LED options

Check power cord connection. Test the outlet with another working device. Water level is too low, or the tank is not seated properly.

Keep the humidifier out of reach of children and pets. Do not allow children to play with the device or its packaging. Technical Specifications Specification Technology Ultrasonic Cool Mist Power Source 120V AC, 60Hz Tank Capacity Varies by model (Typically 0.5 to 1.1 Gallons) Run Time Up to 24 hours (on the lowest setting) Coverage Area Small to medium-sized rooms Package Contents & Product Diagram

is highly recommended to prevent mineral buildup and "white dust" on surfaces. Do not fill past the "Max" level. Powering On : Plug the unit into a polarized outlet with dry hands. Control Buttons Setting Up Your Humidifier Manages power status and

Turn the tank upside down, unscrew the cap, and fill with cool, clean tap water or distilled water. Secure the Cap: Screw the cap back on firmly.

Pour enough white vinegar into the base reservoir to submerge the ultrasonic transducer disc.