3. Mastering the Setup: A Guide to the Kolbus DA 36 Manual Procedures
The is the official technical guide for operating and maintaining the Kolbus DA 36 casemaking machine. It covers critical areas such as troubleshooting common issues like jams or sensor malfunctions and provides detailed instructions for format adjustments and maintenance. Key Technical Specifications
| Specification | Details | | :--- | :--- | | | 405 mm × 560 mm (approx. 15.9" × 22.0") | | Minimum Case Size | 110 mm × 155 mm (approx. 4.3" × 6.1") | | Spine Insert Width | 8 – 80 mm | | Maximum Mechanical Speed | 36 cycles/minute | | Typical Practical Speed | 14–15 cycles/minute | | Adhesive System | Hot-melt glue with pre-melter | | Country of Manufacture | Germany | Kolbus Da 36 Manual
Tighten hopper guides; verify vacuum timing at the placing cylinder. Safety and Compliance Guidelines
Proper machine calibration reduces material waste and prevents jams. Follow this essential setup sequence: Step 1: Adjust the Feeders Key Technical Specifications | Specification | Details |
Inspect the main mechanical cams for scoring or lack of grease. Wipe away contaminated grease and apply fresh high-pressure cam lubricant. Conclusion
Preventative maintenance is critical to preserving the registration accuracy of the Kolbus DA 36. Action Required Glue Tank & Rollers Drain, flush with warm water, and scrape clean. Daily Vacuum Filters Blow out paper dust with compressed air. Weekly Main Drive Chain Inspect tension and apply high-viscosity chain lubricant. Weekly Gripper Pads Clean off adhesive residue using an approved solvent. Monthly Cam Tracks incorrect case formation
The manual includes a troubleshooting section for resolving frequent problems like material jams, incorrect case formation, or sensor malfunctions. www.api.motion.ac.in How to Obtain the Manual
A standard Kolbus DA 36 manual is divided into several sections, ensuring the operator can navigate from installation to production seamlessly. A. Safety Instructions
Before understanding the value of its manual, it’s important to appreciate the machine itself. The number “36” in its name refers to its mechanical speed—, which was double the speed of previous single-headed machines when it was introduced. This innovation set a new industry standard.